Name: Constmach
Address: Halilbeyli Bayosb Nif Caddesi No: 39 Bağyurdu Organize Sanayi Bölgesi, Kemalpaşa - İzmir / Turkey, 35743, TR
Telephone: +905428102548
Price range: $$$
Location: Constmach Fabrika
Rating: 4.6

Products

123 pages

V-70 Mobile Sand Making PlantMobile VSI sand making plant with a 100-150 t/h capacity, a 35 mm maximum feed size, a VSI 700 CR vertical shaft impact crusher and a three-deck screen on a single wheeled chassis.
BS-20 | Concrete Block Making MachineFully automatic concrete block making machine, the entry model of the CONSTMACH BS series, forming 8 hollow blocks and 20 paving stones per cycle on a 1000 x 920 x 40 mm pallet.
BS-25 | Concrete Block Making MachineFully automatic concrete block making machine in the CONSTMACH BS series, forming 10 hollow blocks and 25 paving stones per cycle on a 1200 x 980 x 230 mm pallet.
BS-30 | Concrete Block Making MachineFully automatic concrete block making machine in the middle of the CONSTMACH BS series, forming 12 hollow blocks and 30 paving stones per cycle on a 1200 x 1150 x 230 mm pallet.
BS-36 | Concrete Block Making MachineFully automatic concrete block making machine in the upper CONSTMACH BS series, forming 15 hollow blocks and 36 paving stones per cycle, with an optional dry product cubing robot.
BS-42 | Concrete Block Making MachineFully automatic concrete block making machine, the largest model in the CONSTMACH BS series, forming 18 hollow blocks and 42 paving stones per cycle on a 1400 x 1350 x 230 mm pallet.
CBC-500 | Belt ConveyorCONSTMACH CBC-500 belt conveyor with a 500 mm belt width for transporting aggregate between crushing stages and to stockpile.
CBW - 1000 | Bucket Wheel Sand Washer MachineCBW-1000 bucket wheel sand washer — 110–120 m³/h, Ø3,000 mm wheel with 40 buckets; best for high-clay feed at low water and power use.
CBW - 800 | Bucket Wheel Sand Washer MachineCBW-800 bucket wheel sand washer — 80–90 m³/h, Ø3,000 mm wheel with 40 buckets; best for high-clay feed at low water and power use.
CDS - 1225 | Dewatering Screen & HydrocycloneCDS-1225 dewatering screen with a single 20-inch hydrocyclone — 60–80 t/h; removes residual water and recovers 90-micron fines from washed sand.
CDS - 1635 | Dewatering Screen & HydrocycloneCDS-1635 dewatering screen with a single 26-inch hydrocyclone — 100–150 t/h; removes residual water and recovers 90-micron fines from washed sand.
CDS - 2040 | Dewatering Screen & HydrocycloneCDS-2040 dewatering screen with twin 26-inch hydrocyclones — 150–200 t/h; removes residual water and recovers 90-micron fines from washed sand.
CJC-60 | Jaw CrusherCONSTMACH CJC-60 single-toggle jaw crusher with a 600 x 380 mm feed opening, 30 kW drive and 60-110 t/h capacity for primary crushing in compact quarry and recycling operations.
Compact 30 | Compact Concrete Batching PlantFully automatic compact concrete batching plant — 30 m³/h capacity with skip-hoist transfer, container-shippable footprint and rapid on-site assembly. Cement silos from 50 to 200 tonnes.
CPG - 09 | Vibrating FeederCONSTMACH CPG-09 vibrating grizzly feeder with a 2.500 x 520 mm body and 80-100 t/h capacity for controlled primary feeding.
CPG - 10 | Vibrating FeederCONSTMACH CPG-10 vibrating grizzly feeder with a 3.000 x 850 mm body and 150-200 t/h capacity for mid-range primary feeding.
CPG - 11 | Vibrating FeederCONSTMACH CPG-11 vibrating grizzly feeder with a 4.600 x 1.100 mm body and 200-300 t/h capacity for high-capacity primary feeding.
CPG - 13 | Vibrating FeederCONSTMACH CPG-13 vibrating grizzly feeder with a 4.880 x 1.370 mm body and 350-500 t/h capacity for the largest primary stations.
CPI - 1412 | Primary Impact CrusherCONSTMACH CPI-1412 primary impact crusher with a 1,400 x 1,250 mm rotor, 900 x 900 mm maximum feed, 250 kW drive and 200-250 t/h capacity for medium-hard limestone.
CPI - 1415 | Primary Impact CrusherCONSTMACH CPI-1415 primary impact crusher with a 1,400 x 1,540 mm rotor, 1,000 x 1,000 mm maximum feed, 315 kW drive and 350-400 t/h capacity for medium-hard limestone.
CPI - 1620 | Primary Impact CrusherCONSTMACH CPI-1620 primary impact crusher with a 1,600 x 2,000 mm rotor, 1,300 x 1,300 mm maximum feed, twin 2 x 250 kW drives and 400-600 t/h capacity for medium-hard limestone.
CPLN - 0.5 | Planetary Concrete MixerThe CONSTMACH CPLN-0.5 planetary concrete mixer takes a 750-litre charge and produces 500 litres of compacted concrete per batch using a single mixing star. It delivers high-consistency mixing for precast and high-strength concrete.
CPLN - 0.75 | Planetary Concrete MixerThe CONSTMACH CPLN-0.75 planetary concrete mixer takes a 1,000-litre charge and produces 750 litres of compacted concrete per batch with a single mixing star and 30 kW drive. It suits growing precast and high-strength lines.
CPLN - 1 | Planetary Concrete MixerThe CONSTMACH CPLN-1 planetary concrete mixer takes a 1,500-litre charge and produces 1,000 litres of compacted concrete per batch, driven by a single 45 kW motor. It delivers high-consistency mixing for production precast lines.
CPLN - 1.5 | Planetary Concrete MixerThe CONSTMACH CPLN-1.5 planetary concrete mixer takes a 2,250-litre charge and produces 1,500 litres of compacted concrete per batch, driven by twin 30 kW motors. It delivers large-batch, high-consistency mixing for major precast lines.
CPLN - 2 | Planetary Concrete MixerThe CONSTMACH CPLN-2 planetary concrete mixer takes a 3,000-litre charge and produces 2,000 litres of compacted concrete per batch, driven by twin 37 kW motors. It is the largest planetary model for high-volume precast plants.
CPM - 0.5 | Pan Concrete MixerThe CONSTMACH CPM-0.5 pan concrete mixer takes a 750-litre charge and produces 500 litres of compacted concrete per batch, driven by a 22 kW motor. Its simple structure suits small-batch precast and low-capacity plants.
CPM - 1 | Pan Concrete MixerThe CONSTMACH CPM-1 pan concrete mixer takes a 1,500-litre charge and produces 1,000 litres of compacted concrete per batch, driven by a 37 kW motor. Its simple, robust structure suits mid-capacity precast and block plants.
CPM - 2 | Pan Concrete MixerPan type concrete mixer producing approximately 2,000 litres (2 m3) of compacted concrete per batch with a 55 kW drive, for precast, block and batching plant applications.
CSI - 1210 | Secondary Impact CrusherCONSTMACH CSI-1210 secondary impact crusher with a 1,100 x 1,100 mm rotor, 60-100 t/h capacity and 160 kW drive for second-stage aggregate crushing.
CSI - 1212 | Secondary Impact CrusherCONSTMACH CSI-1212 secondary impact crusher with a 1,100 x 1,250 mm rotor, 120-150 t/h capacity and 200 kW drive for second-stage aggregate production.
CSI - 1215 | Secondary Impact CrusherCONSTMACH CSI-1215 secondary impact crusher with a 1,100 x 1,500 mm rotor, 200-250 t/h capacity and 250 kW drive for high-throughput second-stage crushing.
CSS - 0.5 | Single Shaft Concrete MixerThe CONSTMACH CSS-0.5 single shaft mixer offers a 750-litre charging volume and 500 litres of compacted concrete output per batch, driven by an 18.5 kW motor. It is an economical mixing core for compact ready-mix and small precast plants.
CSS - 1 | Single Shaft Concrete MixerThe CONSTMACH CSS-1 single shaft mixer delivers a 1,500-litre charge and 1,000 litres of compacted concrete per batch, powered by a 37 kW motor. It is a mid-range mixing core for production-scale ready-mix plants.
CSS - 2 | Single Shaft Concrete MixerThe CONSTMACH CSS-2 single shaft mixer takes a 3,000-litre charge and produces 2,000 litres of compacted concrete per batch. It is the largest single shaft model in the range, built for high-volume ready-mix plants.
CSW-50 | Screw Sand Washer MachineCSW-50 screw sand washer — Ø500 x 5,000 mm single-shaft spiral, 25 m³/h capacity, washes and dewaters fine 0–5 mm sand.
CSW-60 | Screw Sand Washer MachineCSW-60 screw sand washer — Ø600 x 6,000 mm twin-shaft spiral, 40 m³/h capacity, washes and dewaters fine 0–5 mm sand.
CSW-75 | Screw Sand Washer MachineCSW-75 screw sand washer — Ø750 x 7,500 mm twin-shaft spiral, 45 m³/h capacity, washes and dewaters fine 0–5 mm sand.
CSW-80 | Screw Sand Washer MachineCSW-80 screw sand washer — Ø800 x 8,000 mm twin-shaft spiral, 50 m³/h capacity, washes and dewaters fine 0–5 mm sand.
CTC - 1275 | Tertiary Impact CrusherCONSTMACH CTC-1275 tertiary impact crusher with a 1,100 x 750 mm rotor, 60-80 t/h capacity and 110 kW drive for final-stage shaping and fine aggregate.
CTS - 1 | Twin Shaft Concrete MixerThe CONSTMACH CTS-1 Twin Shaft Mixer is the entry model of the CTS range, with a 1,500 lt charging volume and a single 37 kW drive producing 1,000 lt of compacted concrete per batch.
CTS - 2 | Twin Shaft Concrete MixerThe CONSTMACH CTS-2 Twin Shaft Mixer offers a 3,000 lt charging volume and twin 37 kW drives, producing 2,000 lt of compacted concrete per batch for mid-range ready-mix and precast plants.
CTS - 3 | Twin Shaft Concrete MixerThe CONSTMACH CTS-3 Twin Shaft Mixer offers a 4,500 lt charging volume and twin 55 kW drives, producing 3,000 lt of compacted concrete per batch for high-output ready-mix and precast plants.
CTS - 4 | Twin Shaft Concrete MixerThe CONSTMACH CTS-4 Twin Shaft Mixer offers a 6,000 lt charging volume and twin 75 kW drives, producing 4,000 lt of compacted concrete per batch for central-mix plants and heavy precast work.
CTS - 5 | Twin Shaft Concrete MixerThe CONSTMACH CTS-5 Twin Shaft Mixer is the largest model in the range, with a 7,500 lt charging volume and twin 90 kW drives, producing 5,000 lt of compacted concrete per batch for the largest central-mix and dam projects.
CVS-1240 | Vibrating ScreenCONSTMACH CVS-1240 vibrating screen with a 1.200 x 4.000 mm box, 4.8 m² deck area and 70-95 t/h capacity for accurate aggregate sizing.
CVS-1640 | Vibrating ScreenCONSTMACH CVS-1640 vibrating screen with a 1.600 x 4.000 mm box, 6.4 m² deck area and 100-130 t/h capacity for graded aggregate production.
CVS-1650 | Vibrating ScreenCONSTMACH CVS-1650 vibrating screen with a 1.600 x 5.000 mm box, 8 m² deck area and 130-160 t/h capacity for graded aggregate production.
CVS-1850 | Vibrating ScreenCONSTMACH CVS-1850 vibrating screen with a 1.800 x 5.000 mm box, 9 m² deck area and 140-180 t/h capacity for high-capacity aggregate sizing.
CVS-2050 | Vibrating ScreenInclined multi-deck vibrating screen with a 2,000 x 5,000 mm deck (10 m2 per layer), rated at 170-220 t/h, for classifying crushed aggregate into size fractions.
CVS-2470 | Vibrating ScreenCONSTMACH CVS-2470 vibrating screen with a 2.400 x 7.000 mm box, 16.8 m² deck area and 268.8-336 t/h capacity for the largest screening duties.
DryMix 60 | Dry Type Concrete PlantFully automatic dry-type concrete batching plant — 60 m³/h capacity, weighs and discharges materials directly into the transit-mixer drum (no on-plant mixer). Cement silos from 50 to 500 tonnes.
Horizontal Cement SiloThe CONSTMACH horizontal cement silo is a 39-tonne (30 m³) trailer-mounted, mobile cement storage unit designed to make concrete plants fully mobile and to minimise site preparation and installation costs.
JC-1 | Mobile Crushing PlantThe JC-1 is CONSTMACH's smallest mobile jaw-and-cone hard stone plant, rated 60 to 80 t/h with a 610 x 380 mm feed opening, used for primary and secondary crushing of granite, basalt and other hard rock.
JC-2 | Mobile Crushing PlantThe JC-2 is CONSTMACH's mid-size mobile jaw-and-cone hard stone plant, rated 120 to 150 t/h with a 900 x 650 mm feed opening, for primary and secondary crushing of granite, basalt and other hard rock.
JC-3 | Mobile Crushing PlantThe JC-3 is CONSTMACH's largest mobile jaw-and-cone hard stone plant, rated 250 to 300 t/h with a 1,100 x 850 mm feed opening, for primary and secondary crushing of granite, basalt and other hard rock.
JCV-1 | Mobile Crushing PlantTriple-chassis mobile hard stone crushing plant combining a primary jaw crusher, secondary cone crusher and VSI third stage, rated at 60 to 80 t/h.
JCV-2 | Mobile Crushing PlantTriple-chassis mobile hard stone crushing plant combining a CJC-90 jaw crusher, Metso HP 200 cone crusher and VSI 800 CR, rated at 120 to 150 t/h.
JCV-3 | Mobile Crushing PlantTriple-chassis mobile hard stone crushing plant combining a CJC-110 jaw crusher, Metso HP 300 cone crusher and VSI 900 CR, rated at 250 to 300 t/h.
JS-1 Mobile Jaw and Secondary Impact Crusher PlantEntry-level mobile crushing and screening plant pairing a CJC-60 primary jaw crusher with a CSI 1210 secondary impact crusher on two wheeled chassis, with a stated capacity of 60-80 tph for medium-hard, less-abrasive stone.
JS-2 Mobile Jaw and Secondary Impact Crusher PlantMid-range mobile crushing and screening plant pairing a CJC-90 primary jaw crusher with a CSI-1212 secondary impact crusher on two wheeled chassis, with a stated capacity of 120-150 tph for low-to-medium-hard, less-abrasive stone.
JS-3 Mobile Jaw and Secondary Impact Crusher PlantHighest-capacity mobile crushing and screening plant in the JS series, pairing a CJC-110 primary jaw crusher with a CSI-1215 secondary impact crusher on two wheeled chassis, with a stated capacity of 250-300 tph for medium-hard, less-abrasive stone.
Mobile 30 | Mobile Concrete Batching PlantFully automatic mobile concrete batching plant — 30 m³/h capacity, single-trailer transport, integrated 26-tonne cement silo on chassis. Rapid on-site assembly with minimal site preparation.
Mobile Asphalt Plant (Batch Type)Relocatable batch-type (tower) hot-mix asphalt plant on a modular chassis, producing graded asphalt in controlled batches with a dryer, screen, weigh hoppers, and twin-shaft pugmill mixer.
PI-1 Mobile Limestone CrusherWheel-mounted primary impact crushing and screening plant for limestone and other low-abrasion stone, with a stated capacity of 150-200 t/h and 900 x 900 mm maximum feed.
PI-2 Mobile Limestone CrusherLarger wheel-mounted primary impact crushing and screening plant in the PI series for limestone and other low-abrasion stone, with a stated capacity of 250-300 t/h and 1,000 x 1,000 mm maximum feed.
Stationary 30 | Stationary Concrete Batching PlantFully automatic stationary concrete batching plant — 30 m³/h capacity, structurally stable layout for medium-scale and long-term ready-mixed concrete projects. Configurable mixers and cement silos from 50 to 500 tonnes.
Stationary Asphalt PlantFixed batch-type (tower) hot-mix asphalt plant for permanent, high-volume production, combining a dryer drum, hot elevator, screen, weigh hoppers, and twin-shaft pugmill mixer.
Stationary Crushing PlantsCONSTMACH stationary crushing plants are complete, project-engineered crushing and screening lines combining primary, secondary and optional tertiary crushers, feeders, conveyors and screens, with capacities typically from 100 to 1,000 t/h.
Stationary Screening & Washing PlantFixed plant that combines vibrating screens, sand washing, and water clarification to produce clean, graded sand and aggregate from raw feed.
SW-1240 Mobile Screening & Washing PlantSW-1240 mobile screening & washing plant — 60 t/h capacity, 1,200 x 4,000 mm screen and 400 x 4,000 mm screw washer on a single wheeled chassis.
SW-1640 Mobile Screening & Washing PlantSW-1640 mobile screening & washing plant — 80 t/h capacity, 1,600 x 4,000 mm screen and 500 x 5,000 mm screw washer on a single wheeled chassis.
SW-1850 Mobile Screening & Washing PlantSW-1850 mobile screening & washing plant — 150 t/h capacity, 1,800 x 5,000 mm screen and 600 x 6,000 mm screw washer on a single wheeled chassis.
SW-2060 Mobile Screening & Washing PlantSW-2060 mobile screening & washing plant — 200 t/h capacity, 2,000 x 6,000 mm screen and 700 x 7,000 mm screw washer on a single wheeled chassis.
VSI-700-CR | Vertical Shaft Impact CrusherCONSTMACH VSI-700-CR vertical shaft impact crusher with a 700 mm closed-rotor (anvil) configuration, 60-100 t/h capacity and 110 kW drive for manufactured sand.
V-80 Mobile Sand Making PlantMid-capacity mobile VSI sand making plant with a 150-200 t/h capacity, a 40 mm maximum feed size, a VSI 800 CR vertical shaft impact crusher, 390 kW total motor power and a three-deck screen.
CBC-650 | Belt ConveyorCONSTMACH CBC-650 belt conveyor with a 650 mm belt width for transporting aggregate between crushing stages and to stockpile.
CJC-90 | Jaw CrusherCONSTMACH CJC-90 single-toggle jaw crusher with a 900 x 650 mm feed opening, 75 kW drive and 90-270 t/h capacity for primary crushing in medium-sized quarries.
Compact 60 | Compact Concrete Batching PlantFully automatic compact concrete batching plant — 60 m³/h capacity with skip-hoist transfer, container-shippable footprint and configurable mixer options. Cement silos from 50 to 200 tonnes.
CS-50 | Cement SiloCONSTMACH CS-50 cement silo — 50-tonne storage capacity (40 m³), bolted or welded construction (customer-selectable), ANSYS-calculated structure, full equipment package.
CTC - 1210 | Tertiary Impact CrusherCONSTMACH CTC-1210 tertiary impact crusher with a 1,100 x 1,000 mm rotor, 80-135 t/h capacity and 160 kW drive for final-stage cubical aggregate and fines.
DryMix 100 | Dry Type Concrete PlantFully automatic dry-type concrete batching plant — 100 m³/h capacity, weighs and discharges materials directly into the transit-mixer drum. Cement silos from 50 to 500 tonnes.
Log WasherTwin-shaft log washer that scrubs heavily contaminated gravel and crushed stone, removing bonded clay and silt through mechanical abrasion between paddle-fitted shafts.
Mobile 60 | Mobile Concrete Batching PlantFully automatic mobile concrete batching plant — 60 m³/h capacity, single-trailer transport and rapid on-site production. Twin-shaft, single-shaft or planetary mixer options.
Stationary 60 | Stationary Concrete Batching PlantFully automatic stationary concrete batching plant — 60 m³/h capacity, configurable single-shaft, twin-shaft or planetary mixers, cement silos from 50 to 500 tonnes. Built for medium-scale and long-term ready-mixed concrete projects.
VSI-800-CR | Vertical Shaft Impact CrusherCONSTMACH VSI-800-CR vertical shaft impact crusher with an 800 mm closed-rotor (anvil) configuration, 150-200 t/h capacity and twin 160 kW drives for manufactured sand.
V-90 Mobile Sand Making PlantHighest-capacity mobile VSI sand making plant in the V series, with a 200-250 t/h capacity, a 45 mm maximum feed size, a VSI 900 CR vertical shaft impact crusher, 440 kW total motor power and a three-deck screen.
CBC-800 | Belt ConveyorCONSTMACH CBC-800 belt conveyor with an 800 mm belt width for transporting higher aggregate volumes between stages and to stockpile.
CJC-110 | Jaw CrusherCONSTMACH CJC-110 single-toggle jaw crusher with a 1,100 x 850 mm feed opening, 132 kW drive and 150-420 t/h capacity for primary crushing in large quarries.
Compact 100 | Compact Concrete Batching PlantFully automatic compact concrete batching plant — 100 m³/h capacity with skip-hoist transfer and configurable mixer options. Cement silos from 50 to 500 tonnes.
CS-75 | Cement SiloCONSTMACH CS-75 cement silo — 75-tonne storage capacity (63 m³), bolted or welded construction (customer-selectable), ANSYS-calculated structure, full equipment package.
CTC - 1212 | Tertiary Impact CrusherCONSTMACH CTC-1212 tertiary impact crusher with a 1,100 x 1,200 mm rotor, 120-170 t/h capacity and 200 kW drive for high-output cubical aggregate and fines.
DryMix 120 | Dry Type Concrete PlantFully automatic dry-type concrete batching plant — 120 m³/h capacity, weighs and discharges materials directly into the transit-mixer drum. Cement silos from 50 to 500 tonnes. Built for the highest sustained dry-mix throughput.
Mobile 100 | Mobile Concrete Batching PlantFully automatic mobile concrete batching plant — 100 m³/h capacity, single-trailer transport, integrated 27-tonne cement silo on chassis, twin-shaft mixer. Rapid deployment for high-volume mobile concrete production.
Stationary 100 | Stationary Concrete Batching PlantFully automatic stationary concrete batching plant — 100 m³/h capacity, twin-shaft or planetary mixer options, cement silos from 75 to 500 tonnes. Built for sustained, high-throughput ready-mixed concrete production.
VSI-900-CR | Vertical Shaft Impact CrusherCONSTMACH VSI-900-CR vertical shaft impact crusher with a 900 mm closed-rotor (anvil) configuration, 200-250 t/h capacity and twin 185 kW drives for manufactured sand.
CBC-1.000 | Belt ConveyorCONSTMACH CBC-1.000 belt conveyor with a 1.000 mm belt width for high-volume transport of aggregate between stages and to stockpile.
CJC-130 | Jaw CrusherCONSTMACH CJC-130 single-toggle jaw crusher with a 1,300 x 1,000 mm feed opening, 160 kW drive and 275-790 t/h capacity for primary crushing in large quarries and mines.
Compact 120 | Compact Concrete Batching PlantFully automatic compact concrete batching plant — 120 m³/h capacity with skip-hoist transfer and twin-shaft mixer. Cement silos from 100 to 500 tonnes.
CS-100 | Cement SiloCONSTMACH CS-100 cement silo — 100-tonne storage capacity (85 m³), bolted or welded construction (customer-selectable), ANSYS-calculated structure, full equipment package.
CTC - 1215 | Tertiary Impact CrusherCONSTMACH CTC-1215 tertiary impact crusher with a 1,100 x 1,500 mm rotor, 230-250 t/h capacity and 250 kW drive for the highest-output final-stage shaping.
Mobile 120 | Mobile Concrete Batching PlantFully automatic mobile concrete batching plant — 120 m³/h capacity in a two-chassis mobile configuration, twin-shaft mixer, external cement silos from 75 to 500 tonnes. Built for the highest sustained output in the mobile range.
Stationary 120 | Stationary Concrete Batching PlantFully automatic stationary concrete batching plant — 120 m³/h capacity with twin-shaft mixer, cement silos from 100 to 500 tonnes. Engineered for continuous high-volume ready-mix and infrastructure projects.
T-75 Mobile Tertiary Impact Crushing PlantMobile tertiary impact crushing and sand making plant with a 60-80 t/h capacity, a 150 mm maximum feed size and a three-deck screen, built on a single wheeled chassis.
VSI-1000-OR | Vertical Shaft Impact CrusherCONSTMACH VSI-1000-OR vertical shaft impact crusher with a 975 mm open-rotor (rock-on-rock) configuration, 250-300 t/h capacity and twin 200 kW drives.
CS-200 Bolted Cement SiloCONSTMACH CS-200 cement silo — 200-tonne storage capacity (158 m³), bolted construction, ANSYS-calculated structure, full equipment package.
CBC-1.200 | Belt ConveyorCONSTMACH CBC-1.200 belt conveyor with a 1.200 mm belt width for the heaviest transport of aggregate between stages and to stockpile.
CJC-140 | Jaw CrusherCONSTMACH CJC-140 single-toggle jaw crusher with a 1,400 x 1,100 mm feed opening, 200 kW drive and 420-850 t/h capacity for primary crushing in large mines and quarries.
Compact 60 with Belt | Compact Concrete Batching PlantFully automatic compact concrete batching plant — 60 m³/h capacity with belt-conveyor aggregate transfer, configurable mixer options, cement silos from 50 to 200 tonnes. Designed for sites that need continuous belt-fed aggregate handling within a compact footprint.
Mobicom 30 | Mobile Concrete Batching PlantUltra-compact mobile concrete batching plant — 30 m³/h capacity in an 8-metre-long road-legal trailer footprint. The smallest mobile in the CONSTMACH range, container-shippable, ideal for restricted-access jobsites.
Stationary 160 | Stationary Concrete Batching PlantFully automatic stationary concrete batching plant — 160 m³/h capacity with heavy-duty twin-shaft mixer, cement silos from 100 to 500 tonnes. Built for large-scale infrastructure and precast facilities.
T-100 Mobile Tertiary Impact Crushing PlantMid-capacity mobile tertiary impact crushing and sand making plant with an 80-135 t/h capacity, a 150 mm maximum feed size, 220 kW total motor power and a three-deck screen.
CS-300 Bolted Cement SiloCONSTMACH CS-300 cement silo — 300-tonne storage capacity (240 m³), bolted construction, ANSYS-calculated structure, full equipment package.
Mobicom 45 | Mobile Concrete Batching PlantUltra-compact mobile concrete batching plant — 45 m³/h capacity in an 8-metre-long road-legal trailer footprint. Higher-throughput sister to Mobicom 30, container-shippable, ideal for restricted-access jobsites.
Stationary 240 | Stationary Concrete Batching PlantFully automatic stationary concrete batching plant — 240 m³/h capacity built around a twin-set twin-shaft mixer configuration, cement silos from 100 to 500 tonnes. Built for the largest infrastructure and precast facilities.
T-120 Mobile Tertiary Impact Crushing PlantHighest-capacity mobile tertiary impact crushing and sand making plant in the T series, with a 120-170 t/h capacity, a 150 mm maximum feed size, 270 kW total motor power and a three-deck screen.
CS-500 Bolted Cement SiloCONSTMACH CS-500 cement silo — 500-tonne storage capacity (390 m³), bolted construction, ANSYS-calculated structure, full equipment package.
Prefeeding ConveyorMobile aggregate pre-feeding conveyor — eliminates the on-site loading ramp by transferring aggregate from grade-level hoppers directly to a concrete batching plant. Sized to match CONSTMACH mobile and compact plants.
CS-1000 Bolted Cement SiloCONSTMACH CS-1000 cement silo — 1000-tonne storage capacity (770 m³), bolted construction, ANSYS-calculated structure, full equipment package, terminal-loading option.
Wobbler FeedersFeeding and scalping unit with rotating elliptical bars, installed ahead of the primary crusher to meter material and remove fines, suited to sticky, wet and clayey feeds.
CS-2000 Bolted Cement SiloCONSTMACH CS-2000 cement silo — 2000-tonne storage capacity, bolted construction, ANSYS-calculated structure, full equipment package, terminal-loading option.
CS-3000 Bolted Cement SiloCONSTMACH CS-3000 cement silo — 3000-tonne storage capacity, bolted construction, ANSYS-calculated structure, full equipment package, terminal-loading option.
Hydraulic Hammer BreakerBoom-mounted hydraulic rock breaker installed over the primary crusher feed to break oversize blocks before crushing, operated by radio remote or manual valve control.

Site Map

General Pages

Authors

Legal

What's new on Constmach