CONSTMACH 300 toneladas de capacidad, el silo de cemento tipo atornillado CS-300 se prefiere especialmente en plantas dosificadoras de hormigón de alta capacidad y también en proyectos en los que el almacenamiento de cemento tiene un papel fundamental.
El silo de cemento CONSTMACH CS-300 está equipado con una plataforma de mantenimiento entre las piernas, tubería de llenado de cemento, pozos de registro internos y externos, protectores de seguridad, bridas de techo para filtro de aire y válvula de seguridad de presión, una compuerta de techo para pozo de registro interno y también una brida cónica para mantequilla. válvula de mosca.
CONSTMACH CS-300 cement silo is supplied together with all necessary silo equipment such as cement screw conveyor with the desired diameter & length, air filter, pressure safety valve, top & bottom level indicators, air fluidization nozzles, pulse valve and cone butter fly valve for manual cement discharging.
Parts of CS-300 bolted type cement silo are manufactured by sensitive laser cutting and drilling methods. In the jobsite, parts of cement silos can be assembled easily and sensitively.
All static load and mechanical calculations of CS-300 is done by using ANSYS Workbench CAE software and the silo is capable to be stocked 300 tonnes of cement or similar material without any deformation in all conditions.
1 layer of anticorrosive paint and 2 layers of FINAL COAT EPOXY PAINT with total paint thickness of 140 Microns are applied on our cement silos.
You can see the general layout, transport information and photos of Cement Silos - CS-300 Bolted by clicking the related tabs and you can request a quotation by clicking REQUEST A QUOTE tabs.
CAPACIDAD TOTAL | 300 T, 230 m³ |
---|---|
ALTURA TOTAL | 18450 mm |
DIAMETRO | Ø 5140 mm |
NUMERO DE PATAS | 6 |
BOCA DE SALIDA | Ø 300 mm |
PIEZAS TOTALES | 191 |
PESO DEL SILO | 22000 kg |
PATAS DEL SILO | Ø 273 x 10 mm TUBOS DE ACERO |
ARRIOSTRAMIENTO | ANGULAR DE 80 mm |
ESPESOR PLACAS DE BASE | 20 mm CHAPA METÁLICA |
MATERIAL DE VIROLAS | 200 mm UPN |
ESPESOR DE CHAPA EN CONO | ST - 37, 8 mm CHAPA METÁLICA |
ESPESOR DE CHAPA EN CILINDRO | ST - 37, 8 - 6 - CHAPA METÁLICA |
ESPESOR CHAPA EN TECHO | ST - 37, 5 mm CHAPA METÁLICA |
TUBO DE CARGA | Ø 4" |
COMPUERTA DE VISITA EN EL CONO | |
COMPUERTA DE VISITA EN EL TECHO | |
BARANDILLA EN TECHO DE SILO | |
PLATAFORMA DE MANTENIMIENTO | |
LA FABRICACIÓN DEPENDE DE LA APROBACION DE CADA PROYECTO Y LA REALIZACIÓN DE SU ANALISIS ESTRUCTURAL. | |